A planer stand is a wheeled table or mobile base that holds a portable thickness planer at a fixed working height, gives you somewhere to bolt the machine down, and keeps blades, dust bags and accessories off the floor. Almost every benchtop planer on the market weighs somewhere between 55 and 100 lb, and a machine that heavy sitting on a folding table will walk across it during a hard pass.
This guide covers the best planer stands for portable planers in 2026, from full mobile planer tables down to folding roller stands that support long boards at each end of the machine. We looked at load capacity against real machine weight, whether the height range actually matches your planer’s bed, top stiffness, caster lock quality, and whether there is a way to bolt the planer down at all.
One clarification before we start: we are talking about powered thickness planers and their stands, not hand planes and not planer boards from a mill. If you want to see how the machines themselves compare, our guide to the best wood planers for rough lumber covers the planer side of the shop.
We also kept the figures out on purpose. They change daily, and every stand below links to a live listing so you can check the current number and the latest owner feedback yourself.
Table of Contents
Top 3 Best Planer Stands for Portable Planers (October 2026)
DeWalt DW7350 Planer Stand
- Stand and mobile base in one package
- MDF top plus lower shelf
- 56 lb integrated unit
WEN MSA658T Rolling Planer…
- All-metal top bolts straight in
- Rollers extend to 54.3 inch
- Retractable swivel caster
POWERTEC UT1002 Tool Stand
- 500 lb rated capacity
- 32 inch work height
- Expandable split MDF top
Quick Overview of All 10 Planer Stands in 2026
| Product | Specs | Action |
|---|---|---|
| DeWalt DW7350 Planer Stand with Integrated Mobile Base |
|
Check Latest Price |
| POWERTEC UT1002 Expandable Tool Stand |
|
Check Latest Price |
 BORA PM-1100 Mobile Base Kit |
|
Check Latest Price |
 WEN MB500 Universal Mobile Base |
|
Check Latest Price |
| WEN MSA658T Rolling Planer Stand |
|
Check Latest Price |
 WORKPRO Folding Roller Stand Two-Pack |
|
Check Latest Price |
 VEVOR 100 lb Planer Stand with Casters |
|
Check Latest Price |
 SGOLAN 500 lb Planer Table with Wheels |
|
Check Latest Price |
 SHALL Folding Roller Stand Two-Pack |
|
Check Latest Price |
 WORKESS 4 in 1 Roller Work Center |
|
Check Latest Price |
1. DeWalt DW7350 Planer Stand with Integrated Mobile Base – Best Overall
DEWALT Planer Stand with Integrated Mobile Base, 24” x 22” x 30” (DW7350)
Weight: 56 lb
Top: 30 x 24.5 inch
Height: 30 inch
Includes MDF top and shelf
Pros
- Stand and mobile base in one package
- Highest rated stand in the group at 4.8 stars
- Stable under heavy planers
- Shelf keeps accessories off the floor
Cons
- Heaviest piece here at 56 lb so it is the least portable
- MDF top needs sealing against moisture
- Fixed top size cannot be resized
The DW7350 is the rare stand that arrives as a complete system rather than a kit. The box contains the mobile base, the stand itself, the hardware, an MDF top and a shelf, so there is no plywood cutting and no hunting for casters on assembly day. It weighs 56 lb as a complete unit, and the published dimensions of the stand are 30 x 24.5 x 6 inches.
That is why we put the DW7350 first. It has the highest rating in the group and by far the deepest review history, and 86 percent of its reviews sit at five stars, which is unusual for a tool accessory. Owners talk about the machine and stand moving as one unit rather than being carried separately.
What makes it work as a planer stand specifically is the combination of a rigid mobile base and an MDF top that resists flex. When a heavy planer sits on a thin top, the ends dip under load and the board leaves the machine on a downward angle.
The honest downside is weight. At 56 lb for the stand alone, adding a planer on top puts a genuinely awkward load on the casters and on your back. This is a shop-stand-and-leave-it product, not a take-it-to-the-job-site product.
What to check before you buy the DW7350
Measure your planer’s footprint against the 30 x 24.5 inch top, and check where the chip discharge port sits relative to that edge on your specific machine. A wide machine on a top this size can leave little room at the outfeed corner.
Also plan how you will secure the machine. The correct fix for machine walk is to bolt the planer to the stand top rather than rely on friction alone.
Who should skip it
If your shop is a one-car garage and you need to roll the planer out to the driveway for a weekend of trim work, 56 lb plus planer weight is a lot to move across a threshold, and a bumpy driveway is hard on any caster.
It is also overkill if your machine is a light benchtop planer and you already have a solid bench you are happy to dedicate. You would be buying a mobile base you do not need.
2. POWERTEC UT1002 Expandable Tool Stand – Best Value
POWERTEC Tool Stand, MDF Split Top Expands to 20″x25″, 32″ Work Height Power Tool Stand for Drill Press, Belt Sander, Bench Grinder, Band Saw, Scroll saw, and Planer (UT1002)
Capacity: 500 lb
Work height: 32 inch
Top expands to 20 x 25 inch
Weight: 23 lb
Pros
- 500 lb rated capacity
- more than a benchtop planer needs
- Expandable split top fits different footprints
- 32 inch height suits most benchtop planers
- Lower shelf for accessories
Cons
- Fixed leg base with no wheels
- Only one adjustable leveling foot
- Unfinished MDF can bow with moisture
The UT1002 is a fixed-leg stand, which is a real limitation and also the reason it is light. At 23 lb it is among the lighter stands in the group and easy to carry between benches, and its 500 lb rating is far more capacity than any benchtop planer needs. The frame is gauge steel with a powder coat finish, and the feet are rubber to damp vibration and protect a shop floor.
The detail that makes it more than a generic tool stand is the expandable MDF split top. It measures 14 x 25 inches closed and opens to 20 x 25 inches, with a ruled surface on top. That range covers the footprint of most 12 and 13 inch benchtop planers without a custom deck.
Owners rate it a solid 4.3 out of 5 across more than 2,000 ratings, with praise split fairly evenly between easy assembly, sturdy steel legs and the adjustable top width. The most common complaint is the leveling: there is one adjustable foot, so on an uneven concrete floor the stand can still rock slightly under a heavy machine.
There is also a warranty point worth knowing. The manufacturer states the stand is not designed for casters, and adding them voids the warranty. That rules out the most common DIY upgrade people attempt, so plan around it.
Why the 32 inch height works for most benchtop planers
Most benchtop planers are designed to be operated at roughly 30 to 34 inches from the floor, and 32 inches sits in the middle of that band. A stand that lands you there means you are not bending or crouching for every pass.
The 18 x 27 inch lower shelf is genuinely useful for a dust bag, a spare cutterhead or a box of carbide inserts. It keeps the bulk of the shop clutter off the floor at no extra cost.
Where it falls short
No mobility at all. If you plan to move between the shop and a job site, or you want to clear the stand to use the space, you will be picking it up rather than rolling it.
Unfinished MDF is the other soft spot. Reviewers mention bowing and swelling when the top is exposed to moisture, so this one wants a sealing coat if your shop is damp.
3. BORA PM-1100 Universal Mobile Base Kit – Best DIY Mobile Base
BORA PM-1100 Mobile Base Kit, Universal Adjustable Tool Base
Capacity: 400 lb
Weight: 11 lb
3 inch casters
Needs a plywood top
Pros
- Makes any planer mobile on a deck you build
- 400 lb capacity with steel corners
- Symmetrical hole pattern
- Quick-lock foot levers
Cons
- No top surface included
- Levers do not always fully lift the wheels
- Protruding bolts must be trimmed flush
The PM-1100 is not a stand in the finished sense. It is four steel corners, four 3 inch casters and quick-lock foot levers that you bolt to a sheet of 3/4 inch plywood to build your own deck. The plywood is not included, and that is the entire point: you choose the top size, the material and whether to laminate the surface.
At 11 lb it is the lightest piece we list, and it carries a 400 lb rating. The symmetrical mounting hole pattern is a detail experienced builders appreciate, because you can reposition the casters without re-drilling anything if your machine footprint turns out to be off-center.
Reviewers treat this as a kit rather than a product. Across more than 2,800 ratings at 4.2 stars, the praise is about flexibility and low weight, and the recurring gripes are mechanical: some foot levers do not lift the wheels clear of the ground, and the mounting bolts can stand proud enough to drag on the floor.
That last point matters more than it sounds. Dragging bolts on a concrete floor will scuff them, and if you built a solid plywood deck rather than a thin panel, add a spacer so the hardware sits flush.
How to get the bolt-down right
Center the machine on the panel and use all four corners. Owners who bolt a tall machine to the center of a thin panel report more flex than those who spread the load, so give the plywood edge distance and avoid a deck narrower than the machine base.
Test the foot levers before you commit to a layout. If the wheels do not fully clear, a shim under the lever arm is the fix most owners settle on.
When this kit beats a finished stand
It wins when you want a top size no catalog sells, when you work in an awkward space and need a narrow footprint, or when you already have a sheet of good plywood and want to put the effort into the deck rather than the hardware.
It loses if you want something usable the day it arrives. You are buying a weekend of building, and the result will only be as stiff as the deck you cut.
4. WEN MB500 Universal Heavy Duty Mobile Base – Best for Heavy Machines
WEN Mobile Base, Universal Heavy Duty, 500-Pound Capacity for Tools and Machines (MB500)
Capacity: 500 lb
Weight: 15.5 lb
Base: 35.4 x 35.4 inch
Fits rectangles to 51.2 inch
Pros
- 500 lb capacity with 4.5 stars
- Foot-locking brakes hold the machine down
- Two fixed and two swivel casters
- Two-year warranty
Cons
- No top surface
- you supply the platform
- Does not raise working height
- Very large footprints will not fit
The MB500 solves a specific problem: making a heavy machine mobile without buying a mobile planer table. It carries a 500 lb rating, weighs 15.5 lb and includes two fixed casters, two swivel casters and two foot-locking brakes in one box. The stand alone measures 35.4 x 35.4 x 4.6 inches.
What sets it apart from cheaper base kits is the fit range. It adjusts to square base configurations from 11.8 x 11.8 inches up to 35.4 x 35.4 inches, and to rectangular bases up to 51.2 x 19.7 inches. For a wide benchtop planer, that rectangular range is the difference between a clean fit and a shimmed compromise.
It carries a 4.5-star average from more than 2,000 ratings, with about 73 percent of those at five stars. Owners describe it as a dependable step up from flimsy imported bases, and specifically mention that the locking brakes keep the machine planted while feeding material.
Those brakes are the feature to test first in your own shop. A base that rolls smoothly but does not hold still gives you a planer that creeps on every pass, which dents the board and stresses the machine.
What you have to supply
A platform. The base is a rectangle of steel frame and casters, so you bolt on your own 3/4 inch plywood. Sized correctly and centered on the frame, the resulting deck is genuinely rigid.
Because it does not elevate the machine, this is a base for a planer that already lives at a usable height on a bench, or for converting several benchtop machines to a mobile lineup.
Who should pass
If your planer currently sits on the floor or on a low stand and you are bent over working, this will not fix that. It is a mobility product, not a height product.
It is also the wrong choice for a full-size floor planer with a wide overhanging base that extends beyond the rectangular fit range. Check your footprint before you commit.
5. WEN MSA658T Multi-Purpose Rolling Planer and Miter Saw Stand – Best for Rolling Setups
WEN Multi-Purpose Rolling Planer and Miter Saw Tool Stand with Extension Rollers (MSA658T)
Height: 29.3 inch
Rollers extend to 54.3 inch
All-metal top
Retractable swivel caster
Pros
- Only stand here with factory extension rollers
- Metal top bolts into with no drilling
- Supports long material out to 54.3 inch
- Retractable caster stores compactly
Cons
- Fixed 29.3 inch height limits it to benchtop machines
- Metal top adds weight
- Retractable caster leaves few height options
The MSA658T is the only stand in this group sold as a dedicated planer and miter saw platform with factory extension rollers. The rollers telescope out to 54.3 inches, which means a full sheet of plywood or a 10 foot board stays supported from the moment it leaves the outfeed until it lands on your stack.
The top is metal rather than MDF, and that single design choice removes the most common complaint about MDF stands. You bolt the machine straight into a steel surface, no drilling, no warping, and no moisture sensitivity.
Overall dimensions are 22.7 x 22.7 x 29.3 inches, and the retractable swivel caster lets you roll the stand out of the way when the work is done. Reviews sit at 4.4 stars from more than 700 ratings, and owners consistently mention the bolt-on surface and the ability to support long boards without sag.
That long support is the feature experienced woodworkers care about most. Snipe is partly a planer geometry problem, but a board that droops the instant it leaves the rollers makes the problem much worse, and a level outfeed surface is one of the more effective ways to reduce it.
Height is the limiting factor to check first
At 29.3 inches this suits benchtop machines. If your planer has a taller bed height, or you prefer to stand rather than lean, you will be working at an angle that no amount of roller extension will fix.
Check that your machine footprint fits a 22.7 inch square top before ordering, and note that the metal surface is heavier than an MDF alternative when you are moving it between benches.
Where it fits a one-person shop
It is built for the workflow of someone working alone: roll the stand into position, lock the caster, feed boards, then roll it back into a corner. One user on r/woodworking described exactly this habit, saying roller supports deflect a little when working alone but support both the machine and the material.
That workflow also pairs naturally with a second support placed on the infeed side, which is what the roller-stand options later in this list are for.
6. WORKPRO Folding Roller Stand Two-Pack – Best Budget Roller Pair
WORKPRO Folding Roller Stand Height Adjustable, Heavy Duty 250 LB Load Capacity, Outfeed Woodworking (Upgraded head), 2PCS
Capacity: 250 lb per stand
Height: 27 to 43 inch
Two-pack
Eccentric foot
Pros
- Two stands give matched infeed and outfeed support
- Continuous screw adjustment with no pin holes
- Highly visible edge guides
- Folds flat for storage
- 4.6 stars from nearly 1900 ratings
Cons
- 250 lb rating is for supporting material
- Not a machine stand
- Plastic adjuster tab can wear
- Crossbar can develop play
These are roller stands, not machine stands, and that distinction decides whether you need them. A roller stand does not hold a planer. It supports the material on either side of it, keeping long boards level as they enter and leave the cutterhead.
You get a two-pack, so one goes on the infeed side and one on the outfeed. Each adjusts from 27 to 43 inches with a continuous screw rather than pin holes, which means you can dial the height to the board instead of picking from three or four positions and living with the nearest one.
The rating is 4.6 stars from more than 1,800 ratings, which puts it near the top of the entire group. Owners consistently use these as infeed and outfeed pairs on a planer or table saw, and the praise centers on smooth chrome rollers, easy continuous adjustment and folding flat for storage.
Highly visible edge guides are an underrated detail here. On a long rough-sawn board, a roller stand with no guide lets the material wander off the rollers, and a board that rolls sideways at the infeed is a board that goes in crooked.
Why roller support reduces snipe
Snipe is the dip at the outfeed end of a planed board, caused by the board losing support the moment it passes the last roller. Extending a level support surface several feet past the machine keeps the board supported through the entire cut, which removes much of the dip.
Forum consensus among woodworkers is that snipe is largely a planer geometry issue that no accessory fully eliminates. Longer, level infeed and outfeed surfaces reduce it, and planing shorter boards trims it off entirely.
What the 250 lb rating really means
It means each stand handles 250 lb of material passing over it, and it is not designed to carry a planer. Treating one as a machine stand is the mistake we see most often.
The single eccentric foot stabilizes on uneven surfaces but does not fully level the roller head, so set the height carefully on your most level part of the floor.
7. VEVOR 100 lb Three-Gear Planer Stand with Casters – Best for DW735 Setups
VEVOR Thickness Planer Stand, 100 lbs heavy loads, Three-Gear Height Adjustable Thickness Planer Table,with 4 Stable Casters & Storage Space, for most planers, saws, bench-top machines, power tools
Capacity: 100 lb
Top: 27.7 x 24 inch
Heights: 30.5, 33.5, 35.4 inch
Weight: 51 lb
Pros
- Large metal top for a heavy benchtop planer
- Three height positions cover most planers
- Four foot-lock swivel casters
- Owners report using it with a DW735
Cons
- 100 lb is the lowest rating among the full tables here
- Three-gear adjustment is coarse
- Instructions are often inaccurate
- 51 lb is awkward to move
The VEVOR is a purpose-built planer table with a 27.7 x 24 inch metal top and three preset height positions at 30.5, 33.5 and 35.4 inches. That top size is generous for a benchtop machine, and owners report running heavy planers on it, including the DeWalt DW735. Check the arithmetic before you commit, because the 100 lb rating leaves little margin for a heavy machine.
Four swivel casters with foot-action locks convert it from a mobile stand to a fixed one, and a middle storage platform keeps dust bags, chisels and spare blades off the floor. Wrenches and extra hardware come in the box, so you are not hunting for tools at assembly time.
The rating is 4.3 stars from 171 ratings, which is a much smaller sample than most of this list. Owners like the solid feel and the fact that the casters lock down firmly enough to keep a planer planted while feeding material.
The most common negatives are the modest 100 lb capacity, the three-gear height adjustment being coarse compared with screw or pin mechanisms, and assembly instruction errors that require care with hole alignment. Buyers also report mounting holes drilled slightly off and needing reaming.
Matching it to a DW735
Owners do use it with the DW735, but check the arithmetic yourself. Add the planer weight to anything already on the top and you can reach the 100 lb rating faster than you expect. A stand at exactly its limit will feel loose in the joints under load.
The 30.5 inch position is the most commonly used setting for these machines, and the pre-drilled mounting holes let you bolt the planer down in the correct position rather than relying on friction.
Where the 51 lb weight becomes a problem
Fifty-one pounds is heavy for a stand you might want to reposition, and it is one of the reasons this scores well in a fixed location and poorly in a mobile one.
Plan your assembly time carefully. Given the reports of misdrilled holes, inspect the mounting pattern against your planer footprint before you tighten anything, and have a drill and a reamer handy.
8. SGOLAN 500 lb Planer Table with Wheels – Best 500 lb Rolling Table
Planer Stand,500 lbs Load Capacity Planer Table with Wheels, Height Adjustable Power Tool Stand, for Most Planers, Saws, Bench-top Machines, Power Tools
Capacity: 500 lb
Frame: stainless steel
Size: 25 x 35 x 25 inch
Weight: 22.9 lb
Pros
- 500 lb capacity on a stainless steel frame
- Two tiers give a 28 x 35 inch upper deck
- Only 22.9 lb for a 500 lb table
- Coated frame resists corrosion
Cons
- Only 62 ratings so long-term durability is unproven
- Height changes by moving to drilled holes
- Only one of the wheels locks
The SGOLAN gives you a 500 lb rated rolling table on a stainless steel frame, and at 22.9 lb it is the lightest of the rolling tables in the group. Overall dimensions are 25 inches deep by 35 inches wide by 25 inches high, with a two-tier layout that gives you a 28 x 35 inch upper deck plus lower storage.
Height changes through four pre-drilled leg positions rather than a continuous mechanism, so like the VEVOR you pick from a set of options. The frame carries a protective coating over the stainless steel, which is the detail that matters most in a shop full of dust.
The 4.6 star rating is impressive, but it comes from 62 ratings, which is the smallest sample in this group. Around 76 percent of those are five stars, so early owners are happy with the frame, the storage and the easy rolling.
Only one wheel has a lock, and that is worth thinking about before you commit. A four-caster stand with one brake can still creep, particularly on the uneven floors that come with a garage or a converted space.
Where 500 lb capacity actually pays off
Almost never for a benchtop planer, which is the honest truth about that rating. It pays off if you use one stand for multiple machines, or if you want headroom for a heavier machine later without replacing the stand.
The deeper value here is the two-tier layout. Dust collection, chip management and accessories all need somewhere to go, and this gives them somewhere to go that is not the floor.
Deciding whether the small sample matters to you
A 62-rating history is thin, so you are buying on current design quality rather than on proven longevity. The stainless steel frame and coated finish are good signs, but a stand that must hold a machine for years deserves some humility.
If you are uneasy about that, building your own from a mobile base kit lets you choose the steel you use, at the cost of an afternoon.
9. SHALL Heavy-Duty Folding Roller Stands – Best Compact Roller Pair
SHALL Roller Stand, Heavy-Duty Folding Roller Stands with 250 LBS Capacity
Capacity: 250 lb per stand
Height: 27.8 to 43 inch
11.5 inch rollers
Two-pack
Pros
- Telescoping height covers planer and table saw heights
- 11.5 inch polished rollers glide full sheets easily
- Edge guides keep long material tracking straight
- Folds flat and assembles in minutes
Cons
- 250 lb rating is for material not machines
- Does not elevate a planer to working height
- Eccentric foot does not fully level
- Folded pair needs two wall hooks
The SHALL pair is a two-pack of folding roller stands with a 27.8 to 43 inch telescoping range, which spans benchtop planer height through table saw height in one adjustment. Each stand carries a 250 lb rating and 11.5 inch polished steel rollers with edge guides.
Those 11.5 inch rollers are the widest in our group, and owners report the difference shows when you are feeding a full sheet of plywood. Wider rollers mean a broader bearing surface and a straighter path for wide material.
The rating is 4.5 stars from more than 300 ratings, and the product ranks second in its retail category. Feedback clusters around roller smoothness, how quickly the stands fold flat, and simple assembly with pre-labeled parts that take under ten minutes.
For small shops this is the strongest argument for the product. They fold, they lean against a wall or tuck under a bench, and they come out when you have a long board coming through the planer.
Roller stand versus a full planer table
A roller stand supports material. A planer table supports the machine. If your planer is already bolted to a solid bench at the right height, roller stands solve the remaining problem, which is long material, and they do it with no shelf, no top and a footprint that disappears when you fold them.
If you do not yet have anywhere to put the planer itself, you need a planer table, and a roller stand will not get you there.
Small details that show up in daily use
There is no single hang point, so a folded pair needs two wall hooks rather than one. The eccentric foot stabilizes on uneven ground but does not fully level the roller head, so set the height on your flattest section of floor.
Get the pair rather than a single stand. One on each side of the machine is what keeps a long board level, and a lone roller stand on the outfeed only solves half the problem.
10. WORKESS 4 in 1 Roller Work Center – Best Multi-Use Work Center
WORKESS 4 in 1 Roller Stand, Stable 440 Lbs Load Capacity with Saw Horses, V-Shaped, Multi-Directional Rollers & Outfeed Roller, Adjustable Height 33”- 50”, Folding for Woodworking
Capacity: 440 lb
Height: 33 to 50 inch
10-step adjustment
Seven ball-bearing rollers
Pros
- Highest work height range here at 33 to 50 inch
- 440 lb on a cross-braced steel frame
- Four configurations in one stand
- Folds flat in two steps
- Zinc-plated rollers resist rust
Cons
- Stepped rather than continuous height adjustment
- Converting to V-rollers means unbolting the head
- Plastic clamps feel fragile
- Bare metal can mark wood
The WORKESS converts between four configurations: a flat-top roller stand, saw horses, V-shaped rollers and multi-directional rollers, using a rotating head rather than separate parts. Capacity is 440 lb on heavy-gauge square steel with a triangular cross-braced frame, and it weighs 26 lb.
The height range of 33 to 50 inches in ten steps reaches higher than any other stand in this group, and it covers working on a tall bench as well as feeding a low machine. Seven ball-bearing zinc-plated steel rollers roll smoothly and resist rust in a shop full of dust.
At 4.3 stars from more than 300 ratings, owners rate it heavy, well balanced and quick to fold, and the versatility genuinely earns its place in a one-person shop where every stand has to earn its footprint.
The criticisms are consistent across reviews. Height changes in fixed pin steps rather than continuously, converting to the V-roller configuration requires unbolting the trestle head, and the plastic-handled clamps feel fragile for the job they do.
When the multi-use case pays off
It pays off when the same stand gets used all day. Feeding long boards through the planer, supporting sheet goods on the table saw, and acting as a pair of saw horses for assembly are three uses for one footprint, which matters when floor space is the constraint.
The V-roller configuration is the one for holding round material, tapered material or a workpiece securely while you work on it by hand.
Protecting your material from bare metal
The supports are bare metal, and owners report it marking workpieces. Adhesive-backed grip tape on the roller and support surfaces solves the problem in minutes.
Check the hardware before a long build session. Keep a spare set of hardware on hand, since some examples arrive with missing acorn nuts or stripped adjuster threads.
Planer Stand Types: Mobile Table, Roller Stand or Flip-Top
The single biggest source of confusion around this topic is that several different products all get called a planer stand. Here is how they differ and when each one is the right answer.
Mobile planer table. A full table with a top, a lower shelf and casters, sold ready to accept a planer. This is the DW7350, the VEVOR and the SGOLAN in our list. It raises the machine to working height, rolls to where you need it, and gives you somewhere to put the dust bag. It is the most versatile option and takes up the most floor space.
Mobile base kit. Steel corners and casters with no top, which you bolt to your own plywood. This is the BORA PM-1100 and the WEN MB500. It makes a machine mobile but does not raise it, so it works when your planer already sits at a usable height.
Fixed tool stand. A steel leg stand with an MDF top, no wheels. This is the POWERTEC UT1002. It is the simplest answer, and it works well in a shop where the planer lives in one place.
Roller stand. A folding pair that supports material at the infeed and outfeed rather than holding a machine. This is the WORKPRO, the SHALL and the WORKESS. If you already have a bench for your planer, roller stands address the one problem that matters most at that point, which is long material support, and they take up almost no floor space when folded.
A fifth option is the folding or flip-top stand, which folds against a wall in a very small shop. These are worth searching for under folding planer stand rather than mobile planer stand if floor space is the problem.
How Tall Should a Planer Stand Be? 28 to 34 Inches to the Bed
Most benchtop planers are built to be used with the bed sitting between 28 and 34 inches off the floor, and the sweet spot for most body types is 30 to 32 inches. The right number for you is the height of your planer’s own bed, not the tallest setting the stand offers.
Here is how to find it in five steps.
Set your planer on any flat surface you currently use.
Measure from the floor to the top of the bed with a tape measure or a straight edge and a rule.
Write that number down. This is your target.
Check the stand’s published height range and confirm your number sits inside it, ideally near the middle rather than at an extreme.
After assembly, measure again at the bed with the planer mounted and the casters locked, then use the stand’s leveling feet to close any gap.
One warning: measure the bed, not the top surface. The height printed for a stand is usually the top of the frame, and the machine bed that sits on it can end up a little lower or higher than the number you assumed. That difference is exactly the slope that creates snipe.
How Stand Height and Stiffness Cause Snipe
Snipe is the dip at the outfeed end of a planed board. Part of it is unavoidable planer geometry, but the stand controls how much of it you actually see.
Level the top first. An out of level stand means the board leaves the machine on a downward angle. Check with a straight edge across the top before you mount anything.
Eliminate deflection. A top that flexes under a heavy planer does the same thing as an unlevel top, and does it repeatedly under load. Rigid steel frames with cross-bracing hold their shape better than thin panels on four plain legs.
Extend the support surface. Once a board clears the last roller it is unsupported, and gravity pulls the end down. A roller stand placed close to the machine on the outfeed side keeps the board level through the entire cut.
Bolt the machine down. A planer that shifts during a hard pass changes depth mid-board. Fixing it with bolts rather than friction also protects the machine itself.
Shorten very long boards. Forum consensus among woodworkers is that snipe reduces sharply on shorter material. Planing a 6 foot board instead of an 8 foot one often removes more dip than any accessory change.
The practical takeaway is that a pair of roller stands is the first thing most home shops should add, and the second is a stand top that does not flex under the machine.
Buy vs Build a Planer Stand: What Each Route Costs in Time
The most active discussion on this topic is a simple build-or-buy argument, and it comes down to your shop and your tolerance for an afternoon of work.
Build it yourself. You need a mobile base kit, a sheet of 3/4 inch plywood, a jigsaw or a table saw, and an afternoon. The BORA PM-1100 and the WEN MB500 are both suited to this, their symmetrical hole patterns make the drilling straightforward, and the result is a top size that catalog products do not offer.
Convert something you already own. A common shop trick is a low-cost side table with Harbor Freight casters added underneath. It works, but frame rigidity and caster quality are both below what a purpose-built base gives you.
Buy a finished table. You get a matched top, a shelf, tested casters and a warranty. You give up the ability to size the top yourself, and the top dimensions were chosen for you.
Our take: build if you enjoy building and want a custom footprint. Buy if you want to plan a board tomorrow, if your machine is heavy enough that frame stiffness matters, or if your shop is too tight to have a half-finished project sitting in the middle of it.
Matching a Stand to Your Planer Model
Load capacity and machine weight
Add your planer’s weight to anything sitting on the stand top, and then leave yourself headroom. A stand rated at 100 lb holding a machine that weighs 95 lb has no margin, and you will feel it in every joint in the frame during a hard pass. A 500 lb rating is plenty for a benchtop planer.
Top size and mounting holes
Check that your planer footprint fits the top with a few inches to spare, and look for pre-drilled hole patterns. A metal top you can bolt into is more useful than a wooden one you have to drill yourself on an uneven garage floor.
Height match to the planer bed
This is the single most consequential spec, and it is the one most product pages skip. Measure your bed height as described above, then confirm the stand range covers it near the middle.
Stiffness over capacity claims
A capacity number is a marketing claim. Rigidity is what determines whether the board leaves level. Cross-braced steel frames and thick tops hold their shape, while thin sheet metal on four plain legs does not.
Casters, locks and levelers
Count the number of locking casters. A four-caster stand with one brake can creep on an uneven floor, and a planer that moves during a pass marks the board. Four locking casters and at least two adjustable levelers is what we look for.
Storage, chips and dust clearance
Check the dust port position before you buy. On some benchtop planers the chip ejection port sits directly over the outfeed side, so a raised lip or a shelf in that spot can obstruct chip flow. A lower shelf is where the dust bag and spare knives should live.
What to do about machine walk
Light machines are the worst offenders. Reviews of lighter planers repeatedly describe the machine sliding during hard passes, and the only reliable fix is bolting it to the stand top. If a stand has no pre-drilled holes and no flat boltable surface, that is a real problem worth weighing before you buy.
Frequently Asked Questions
How tall should a planer stand be?
Most benchtop planers are built to be used with the bed between 28 and 34 inches off the floor, and 30 to 32 inches is the most comfortable range for most people. Measure from the floor to the top of your planer’s own bed, then pick a stand whose adjustment range covers that number near the middle rather than at an extreme. Measure the bed, not the stand top, because a sloped surface at the outfeed side is a direct cause of snipe.
Do I need a stand for a benchtop planer?
If you already have a heavy, level, dedicated bench for your planer, you do not need a stand. If you plan on the floor, a folding table, or a shared bench, you do. Most benchtop planers weigh 55 to 100 lb and will walk during a hard pass, which dents the board and stresses the machine. A stiff, level stand also keeps long boards supported, which is the biggest factor in how much snipe you get.
Is the DeWalt DW7350 planer stand worth it?
It is the strongest all-in-one option in our group because the box contains the stand, the mobile base, the hardware, an MDF top and a shelf, so there is no plywood cutting and no separate caster purchase. It carries a 4.8 star average from more than 4,700 ratings. The trade-off is weight: the stand alone is 56 lb, so it is built for a shop location rather than for frequent transport.
Do planer roller stands reduce snipe?
They reduce it, but they do not eliminate it. Snipe is largely a planer geometry issue that no accessory removes entirely. A roller stand placed close to the machine on the outfeed side keeps the board supported after it clears the last roller, where gravity would otherwise pull the end down. Owners also report that planing shorter boards reduces the dip noticeably, since the unsupported moment is shorter.
Should I buy or build a planer stand?
Build if you enjoy the project and want a top size no catalog sells: a mobile base kit plus a sheet of 3/4 inch plywood gets you there in an afternoon. Buy if you need the machine on a bench this week, if the planer is heavy enough that frame stiffness really matters, or if your shop is too tight for a project in progress. Converting an existing side table with casters added is the cheapest route but gives up frame rigidity.
The Verdict: Which Planer Stand to Buy in 2026
The DeWalt DW7350 wins our roundup of the best planer stands for portable planers in 2026 because it is the only option here that arrives complete: stand, mobile base, MDF top, shelf and hardware in one box, with the highest rating and the deepest review history in the group. If you want one product and no assembly decisions, that is the one to start with.
For a lighter budget, the POWERTEC UT1002 gives you 500 lb of rated capacity and a 32 inch working height in a lighter, simpler frame, at the cost of wheels. If you already have a home for the planer and only need long material supported, a two-pack of roller stands will improve your surfaces more than any machine stand will.
Before you buy anything, measure your planer’s bed height and check whether the stand bolts down. Those two details decide whether you get flat boards or a planer that walks across the shop.